Electronic projects


you are here: home page :: projects :: Audio :: preamps, filters, effects :: Electronics Attenuator

Electronics Attenuator

circuit diagram

Two low voltage, low power zeners are used to control electronically the level of an audio signal. The attenuation range is from 6 to 58dB for an input current from 0.042 to 77 mA corresponding to a control voltage from 2.7 to 7.5V. If control voltage is limited to 5V, the attenuation is around 30dB at a control current of 2mA. This is not an HiFi attenuator but might come useful as a general purpose audio attenuator.

author: unknown
e-mail: none
web site: http://www.electronics-lab.com
project categories:
folder Audio (49)
folder Power & high voltage (43)
folder Radio (23)
folder Light & LED (31)
folder Tools & measurement (40)
folder Telephone (18)
folder Automotive (10)
folder Microcontrollers (12)
folder Sensors & control (47)
folder Timers & oscillators (40)
folder Miscellaneous (26)

StumbleUpon button

Share this page
Bookmark and Share
project subcategories:
All subcategories
amplifiers
preamps, filters, effects
VU meters & spectrum analyzers
mixers
other

similar projects:
Automatic Loudness Control
Bass-treble tone control circuit
Digital Volume Control
Low pass filter - Subwoofer
Phono Preamplifier
Portable Microphone Preamplifier
Simple Digital Volume Control
Stereo Preamplifier with Bass-boost

recently added projects:
Doorbell for the Deaf
High Quality Intercom
Combinational Conjuring Trick
POT-PLANT POWER
Ultrasonic Dog Whistle
Quiz Circuit
LED Torch
Insect Repellant
Speaker Microphone Circuit
Magic Wand Conjuring Trick.

most popular projects:
Led display digital Voltmeter
500W low cost 12V to 220V inverter
Low pass filter - Subwoofer
Metal Detector
High And Low Voltage Cut Off With Time Delay
Basic UPS Power Supply
2N3055 Power Amplifier
200W audio amplifier
LED Torch
100W RMS Amplifier


DIY Electronics Projects

Promote Your Page Too